DNC-1064 4m Underwater-to-Surface HDMI Cable
The DNC-1064 is a 4-meter / 14 ft underwater-to-surface HDMI extension cable designed to transmit a clean HDMI video signal from an underwater camera housing to an external HDMI monitor, recorder, or display.
This cable is ideal for pole-mounted underwater camera systems where the camera housing stays underwater and the HDMI monitor is positioned above the water or on the surface side of the setup. It allows the operator to frame, monitor, and record live video while keeping the display easy to view and control.
Key Features
- 4m / 14 ft cable length: Practical length for compact underwater camera systems, pole mounts, and surface monitor setups.
- Underwater-to-surface HDMI connection: Sends HDMI video from an underwater camera housing to an external HDMI monitor, HDMI recorder, or display.
- Waterproof underwater connector: One end features a Dive And See waterproof HDMI connector for connection to a compatible HDMI bulkhead connector.
- Standard HDMI output: The surface end features a standard HDMI Type-A male connector for easy connection to HDMI monitors, recorders, or TVs.
- 1080p60 HDMI video support: Designed for reliable HDMI video transmission up to 1080p60.
- NEMA 6 / IP68 rated cable construction: Built for underwater use when properly connected to compatible Dive And See waterproof connectors.
Typical Application
A typical setup uses the DNC-1064 with an underwater camera housing fitted with a compatible HDMI bulkhead connector. The waterproof end of the cable connects to the housing bulkhead connector, then the cable can be routed along a pole mount or support arm to an HDMI monitor positioned above the water.
This makes it easier to frame, monitor, and record underwater video while keeping the display accessible to the operator.
Compatibility
- Compatible with Dive And See HDMI bulkhead connectors.
- Can be used with underwater camera housings equipped with a matching Dive And See HDMI bulkhead connector.
- Suitable for Aquatica housing setups when used with a compatible Dive And See / Aquatica HDMI bulkhead connector configuration.
- Works with HDMI monitors, HDMI recorders, and displays that accept a standard HDMI Type-A input.
Specifications
- Part Number: DNC-1064
- Length: 4 meters / 14 ft
- Signal Type: HDMI video
- Video Support: Up to 1080p60
- Underwater End: Dive And See waterproof HDMI connector
- Surface End: HDMI Type-A male connector
- Waterproof Rating: NEMA 6 / IP68 cable construction for underwater use
Important Notes
- The HDMI bulkhead connector is sold separately.
- The cable must be used with compatible Dive And See waterproof connectors to maintain underwater sealing.
- Custom cable lengths and connector configurations may be available upon request.
