DNC-2058
Uwater Power bulkhead connector M16, long thread, 5.5x2.1mm DC Male Plug End
* This DNC-2058 bulkhead connector is used for facilitating the transmission of Power between underwater systems
* Power underwater bulkhead connector with thread M16x1 (6.5mm length of the thread) and standard male 2.1mm x 5.5mm Barrel plug
* Bulkhead connector has a water block, which is allowing to keep vacuum inside of your underwater housing
* The protective cap and security nut are included
* Underwater power bulkhead connector compatible with Dive And See cable DNC-1113
Brief Description
*Widely compatible with all CCTV security surveillance camera systems and other 2.1mm x 5.5mm DC power supply application
* Work up to 24v circuits
* Rated for 5.0A on 12V.
* Connector consist two Stranded flexible Wires 18 AWG, 10" long.
* Bulkhead connector made from Marine grade aluminum with Hard anodizing coating.
* Avaiable threads: M16x1 short thread (Nauticam); M16x1 long thread (Aquatica/ Amphibico/Aquatech)
Application
When you shoot in the swimming pool using a powerful strobe, our power set will allow feeding continuous power for the strobe.
With this power cabling solution, you do not need to use the battery for the strobe.
Water Block
Underwater Bulkhead connector comes with the built-in water block.
The water block keeps the vacuum inside of the housing when using the AirLock Vacuum System.
Also protect the housing against penetration of the water, if something happening with external cable or connection between external cable and bulkhead connector.
Outline Drawing
Available threads for this bulkhead connector:
For Nauticam housings - M16x1 short thread.
For Aquatica/Amphibico housings - M16x1 long thread with security nut.
