Product Overview
The DNC-2204 is a custom-engineered M14 USB-C bulkhead connector designed for professional underwater camera housings using the Nauticam M14 Offset Connector with Vacuum Valve II (SKU #25626).
This unique solution allows underwater photographers and filmmakers to recharge camera batteries, transfer photos and videos, and access compatible camera control functions without opening the underwater housing or releasing its internal vacuum.
Originally developed for a Sony Alpha 1 II camera installed in a Nauticam NA-α9III underwater housing, the DNC-2204 combines USB-C connectivity with the existing Nauticam offset vacuum valve system while preserving its vacuum functionality.
The internal connection features a low-profile, right-angle USB-C male connector with a flexible 200mm internal cable, designed for installations where space between the camera and housing is limited.
The system supports USB-C Power Delivery (PD) fast charging with compatible equipment and USB 2.0 data transfer speeds of up to 480 Mbps.
Keep Your Housing Sealed. Keep Your Optics Clear.
Opening an underwater housing between dives can introduce humid outside air into the housing and its optical system. This is particularly problematic when working on boats, in tropical climates, and in other humid marine environments.
Temperature differences can cause moisture to condense on the internal surfaces of dome ports, flat ports, and complex underwater optical systems. These surfaces may be difficult to access and clean, potentially interrupting an entire underwater photography or video production session.
The DNC-2204 features an independently sealed, water-blocking and vacuum-sealed electrical feedthrough. This design allows the external protective cap to be removed and a compatible USB-C surface cable to be connected without releasing the existing housing vacuum.
- Maintain Vacuum Integrity: Preserve the existing housing vacuum even when the external protective cap is removed.
- Preserve the Dry Internal Environment: Minimize the introduction of humid outside air between dives.
- Reduce Internal Fogging Risk: Help minimize condensation inside dome ports and other underwater optical systems.
- Charge Without Opening the Housing: Recharge compatible camera batteries directly through the external USB-C connection.
- Transfer Files Without Removing the Camera: Download photos and videos from the camera's memory card directly to a compatible computer.
- Reduce Production Downtime: Spend less time opening, resealing, and reestablishing the housing vacuum.
Charge. Transfer. Maintain Vacuum. Without opening your underwater housing.
Key Features
- Custom M14 Bulkhead Design: Specifically engineered for integration with the Nauticam #25626 offset vacuum valve assembly.
- USB-C PD Fast Charging: Supports Power Delivery charging with compatible cameras and USB-C power supplies.
- USB 2.0 Data Transfer: Supports data transfer speeds of up to 480 Mbps.
- Low-Profile Right-Angle USB-C: Compact internal male connector designed for restricted camera housing clearance.
- Flexible Internal Cable: 200mm / 7.9 inches in length.
- Water-Blocking and Vacuum-Sealed Feedthrough: Maintains the housing seal independently of the removable external protective cap.
- Retains Vacuum Valve Functionality: Combines USB-C connectivity and the Nauticam vacuum valve within a single offset assembly.
- Detachable External Cable: Compatible with the DNC-1181 USB-C surface extension cable, sold separately.
Why Custom Assembly Is Required
The Nauticam M14 Offset Connector with Vacuum Valve II (SKU #25626) was originally designed to allow an additional bulkhead connection to share a housing port with the vacuum valve system.
Although the offset adapter features an M14 threaded connection, its internal passage narrows to approximately 9.5mm (3/8 inch).
This restricted opening is too small to accommodate the preassembled low-profile, right-angle USB-C connector used in the DNC-2204.
For this reason, the DNC-2204 requires professional integration into the Nauticam offset assembly by Dive And See and cannot be installed as a conventional preassembled standalone bulkhead connector in this configuration.
Important Ordering Requirement: Customers must send their Nauticam M14 Offset Connector with Vacuum Valve II, SKU #25626, to Dive And See for custom assembly. The completed unit will be returned with the DNC-2204 USB-C bulkhead integrated into the supplied Nauticam offset assembly.
How It Works
- The DNC-2204 is professionally integrated into the customer-supplied Nauticam #25626 offset vacuum valve assembly.
- The completed assembly is installed in the compatible underwater housing.
- The internal right-angle USB-C connector is connected to the camera.
- The housing is closed, sealed, and evacuated according to the housing manufacturer's instructions.
- After diving, bring the housing above water, rinse as appropriate, and thoroughly dry the connector area.
- Remove the external USB-C bulkhead protective cap without opening the housing.
- Connect the DNC-1181 USB-C surface extension cable.
- Connect a compatible USB-C charger to recharge the camera, or connect a computer for file transfer and supported camera-control functions.
- Disconnect the external cable and reinstall the protective cap.
- Verify housing vacuum integrity before the next dive.
Real-World Customer Installation
The DNC-2204 was developed in response to a customer's requirement to add USB-C charging and data connectivity to a Sony Alpha 1 II camera installed in a Nauticam NA-α9III underwater housing.
The installation required simultaneous accommodation of the housing's existing M24 HDMI connection, the Nauticam offset vacuum valve, and a compact internal USB-C connector.
By integrating the USB-C bulkhead directly into the Nauticam #25626 offset assembly, Dive And See provided a compact solution that preserves vacuum functionality while adding convenient external camera access.
The completed system allows the photographer to recharge the camera and transfer files between dives without repeatedly opening and resealing the underwater housing.
Real-World Charging and Data Transfer Testing
During development, Dive And See tested the USB-C bulkhead and external cable assembly using a Sony Alpha 7 III camera and a digital USB power meter.
- Measured Voltage: 4.984V
- Measured Current: 1.445A
- Measured Power: 7.215W
- Test Camera: Sony Alpha 7 III
The test verified successful electrical power delivery through the cable and bulkhead assembly.
Additional development testing demonstrated successful USB file transfer, remote camera control, and USB Live View using compatible Sony camera software.
Remote camera control and Live View were also successfully demonstrated in a separate test configuration using a 30-meter USB cable. This test illustrates the versatility of USB 2.0 communication and is not a guaranteed operating distance for the standard DNC-1181 cable.
Performance Note: The measured charging test represents operation at approximately 5V. Actual USB-C PD voltage, current, and charging power depend on the camera, power supply, and complete connection configuration. USB 2.0 supports a maximum theoretical data rate of 480 Mbps; actual file transfer speeds may be lower.
Applications
- Professional underwater photography and cinematography
- Camera battery charging between dives
- Photo and video file transfer without opening the housing
- Closed-housing camera access
- Compatible USB remote camera control and Live View
- Marine research and underwater imaging systems
- Underwater camera systems operating in humid environments
- Reduced risk of internal dome port condensation
- Custom Nauticam vacuum valve and USB-C integration
Compatibility
- Confirmed Camera Configuration: Sony Alpha 1 II
- Confirmed Housing Configuration: Nauticam NA-α9III
- Required Offset Assembly: Nauticam M14 Offset Connector with Vacuum Valve II, SKU #25626
- External Surface Cable: DNC-1181
Other camera and housing configurations may be possible, depending on port geometry, available internal clearance, camera USB-C functionality, and compatibility with the Nauticam offset assembly.
Contact Dive And See before ordering for alternative configurations.
Technical Specifications
- Model: DNC-2204
- Manufacturer: Dive And See
- Product Type: Custom vacuum-sealed USB-C bulkhead connector
- Mounting Thread: M14
- Required Nauticam Assembly: SKU #25626
- Internal Connector: USB-C male, 90-degree right-angle, low-profile
- Internal Cable Length: 200mm / 7.9 inches
- USB Standard: USB 2.0
- Maximum Nominal Data Rate: 480 Mbps
- Charging Protocol: USB-C Power Delivery (PD) with compatible equipment
- Sealing Design: Water-blocking and vacuum-sealed feedthrough
- Vacuum Integrity with Protective Cap Removed: Yes, when correctly installed and sealed
- External Connection: Detachable compatible Dive And See cable
- Recommended Surface Cable: DNC-1181
- Installation: Custom assembly by Dive And See
Compatible Products and Accessories
- DNC-1181 USB-C Surface Extension Cable – 3ft external cable supporting USB-C PD charging and USB 2.0 data transfer up to 480 Mbps. Designed for above-water operation.
- Dive And See USB Bulkhead Connectors – Explore additional USB connection solutions for underwater housings and sealed enclosures.
Important Operating Information
- The external protective cap must be securely installed before underwater operation.
- Connect and disconnect external USB cables only in dry, above-water conditions.
- The DNC-1181 surface extension cable is not designed for underwater operation.
- Always inspect sealing surfaces and O-rings before diving.
- Verify housing vacuum integrity before deployment.
- Follow the housing manufacturer's vacuum system and maintenance instructions.
- Preserving the housing seal helps reduce condensation risk but does not guarantee complete elimination of internal fogging.
- Charging, data transfer, remote control, and Live View depend on camera and software compatibility.
- USB 3.x SuperSpeed and USB-C DisplayPort Alternate Mode are not supported by this USB 2.0 configuration.
What's Included
- One custom DNC-2204 M14 USB-C bulkhead connector
- 200mm flexible internal cable with right-angle USB-C male connector
- External protective sealing cap
- Custom integration into the customer-supplied Nauticam #25626 offset assembly
Not Included: Nauticam #25626 offset vacuum valve assembly, DNC-1181 external USB-C cable, camera, underwater housing, computer, and USB-C power supply.
Custom Ordering and Installation
The DNC-2204 is a custom-engineered product requiring integration into your existing Nauticam #25626 offset vacuum valve assembly.
Please contact Dive And See to confirm compatibility and arrange shipment of your Nauticam offset assembly before ordering.
Keep Your Housing Sealed. Keep Your Optics Clear. Spend More Time Underwater.